Who is Perfect Fit?
Perfect Fit has been building car bras for more than 32 years. They currently are the largest car bra manufacturer in the world. We have been supplying automobile manufacturers and car dealers around the world as a private label manufacturer for more than a decade. Our products have never been available in any stores, only at new car dealerships and over the internet at our site CarBras.com
	How does it attach to my car?
No drilling, glue, tape or modifications at all! We have designed an exact snap system use to hold the bra in the proper location at all times There are two different types of exact snaps. One is a snap screw We use a screw with a snap stud head on it that you insert in the wheel well instead of the factory screws which hold the inner liner to the fender. Some cars don’t have the removable screws so we have developed an accu clip that inserts between the fender and the inner wheel well liner. Then you pull the vinyl bra (which has a female snap head on it) around the fender and snap it into place.
	How long does it take to put on?
Installation is fairly easy to do; there is a full pictorial instruction book to show you step by step how to put on your new Perfect Fit custom fitting car bra. The first time you put it on it will take you about 20-30 minutes to install it and after that every time you put it on it should take about 5 minutes.
	What about a front licenses plate opening?
Perfect Fit car bra offers most bras with the option to have a plate opening or not, depending if you have a front licenses plate on you vehicle.
	Can it damage my paint?
In the last 10 years bra manufacturing and technology has came a long way. And so has the automobile manufacturer's paint. In years past most automobile manufacturers only put one coat of paint on cars. A characteristic of only one coat of paint was clouding of the finish, due to having a wet bra on a car and moisture settling in underneath the paint. In the mid 80’s all of the major car builders finally agreed to add another layer in using clear coat. With any car with a clear coat on it, it is almost impossible to get any haze or clouding. But it is still important to have a bra that won't retain water from rain or dew. If it does hold moisture, there is a chance the bra will mold. If a car bra is made correctly there is no need to worry about water being trapped under the hood. At PERFECT FIT we have developed in our hood sleeve a “unique water channeling” system that keeps excessive water from building up underneath your hood, and while you’re driving it actually speeds up the water evaporation time. Some bras can buff or chafe the paint due to a poor-fitting bra that flaps and flutters with movement. Perfect Fit car bra has a special “Blue Printing” process that actually produces an exact mirror image of your vehicle’s dimensions. All of our bras are road and wind tunnel tested for bra movement to the speeds of 250kpm/180mph. Our car bras will not flap or flutter even when combined vehicle speed and wind gust exceed those speeds.
	Do I need to take it off when it gets wet?
Perfect Fit is the only Car Bra manufacturer that claims you can use your bra 365 days a year. Why own a bra if you can't use it when the weather is bad? That is when you need it the most . . . snow, sand, gravel can be nasty. We recommend if you don't drive your car for periods of 72 hours or more and it is parked outside in wet weather, that you to take off the bra so no mold or mildew will grow underneath it. However, if it is constantly being driven there is no need under normal circumstances to remove the bra. We also recommend that you take it off weekly or biweekly as you wash your car and clean underneath it. It’s a good idea to have a good coat of wax on your car, as well.

	Is it breathable?
Yes, our vinyl is breathable to help evaporate any moisture under the bra. With our “unique water channeling system” you can actually take a garden hose and put it under your hood piece of the bra and watch the water be wicked out.
	What is it made of?
We use the highest quality materials available in building our bras. The fabric used is a tri-composite material tested to meet our own demanding requirements. The vinyl segment is designed specifically to resist stones deflecting against it. As well, it is constantly tested for its ability to withstand extreme temperatures. The backing is a substrate of super-soft porous polyester which helps keep your paint scratch free! A special process actually integrates the backing to the vinyl, eliminating any possibility of separation. The final component involves the application of a top coating to the vinyl, in effect creating a “shield” that enables your Car Bra to withstand the most rugged weather conditions. Each and every piece is robotically cut and assembled using our exclusive “match check system”, to assure that every bra made is 100% PERFECT. Just as a Perfect Fit car bra should be!
	How do I clean it?
Perfect Fit car bra recommends that you clean the bra while it is still on your car with normal car washing soap. After you clean the outer vinyl side, take it off if possible and wash the innerside (cotton / polyester) with the same soap. After that, put the bra aside while you clean the rest of you car. And then reapply the bra either after the bra has had a chance to drip most of the water off or before you drive the car again. The sheen will stay the same as long as you keep it clean. There is no need to put any dressing on it, if you do it will attract dirt and it will restrict the breathing, which dries the bra. We highly recommend to put nothing on it we put a seal on the vinyl so it won't change colors.

Return Policy

• Used items may not be returned under any circumstances.
• We are not responsible for items damaged by improper use or installation.
• All items must be returned with original packaging and materials and be in perfect, new condition.
• Shipping and handling charges are not refundable. You are responsible for shipping and insuring returns.
• Products returned that were purchased during a Free Shipping promotion are subject to having regular shipping charges deducted from any refund.
• All returns are subject to a 10% restocking fee at our discretion.
• Returns must be made within 30 days of receiving the product.
• Custom made and special orders are not returnable.